I wanted to build a 4x4x7 feet wooden flight cage for my budgies
Without any knowledge and experience I was not confident so started researching. After gathering as much information as I can, decided to build a double breeding cage first to have the confidence and experience to do that
So here is the wooden double breeding cage
Wood (I have lengths of 8 feet x 3.5 inches x 1.5 inches and 4 feet x 3.5 inches x 1.5 inches)
Tools, Screw and Nails I use
Sketch for working and calculations
Dimension = 24x18x48 inches
Dimension of each breeding section = 24x18x20 inches
Gap between sections for tray = 2 inches
Size of frame of Door = 7x9 inches
Size of Door = 6.5x8.5 inches (0.25 inch gap on each side)
Required Cutting of Wood (4 feet x 0.75 inches x 0.75 inches) machine work not mine
[IMG]

[/IMG]
Cut these to required lengths for basic frame
48” 4pcs
22.5” 10pcs
18.5” 2pcs
16.5” 14pcs
7” 6pcs
6.5” 4pcs
Basic frame (screwed together by 2 inch screw after drilling)
Mash Installation
That's how use the nails to attach mash
Wooden Framing (to cover the sharp ends of mash cut this 8 feet 0.75 inch x 0.20 inch to required lengths)
Showing sharp edges of mash
Frame covering the mash
Finally front view
Side and back view
Metal trays will arrive after 5 days I am too much excited to share so could not wait for that long